excavator weight dozer weight 14,000 22,000 lbs 22,000 45,000 lbs 45,000 75,000 lbs brand case a daewoo deere a hyundai kobelco a linkbelt samsung takeuchi
h links, pins & bushings a excavator ref. part no. description notes qty. lbs. a ex100 1, ex100 2, ex100 3, ex100 5, ex120 1, ex120 2, ex120 3, ex120 5 1 3037080 pin bucket to dipper arm 1 24 2 3037081 pin bucket to h link 1 24 3 3037079 pin link to dipper 1 21 4 3037082 pin link to cylinder 1 20 5 8050179 h link 1 141 6 4196558
pins, links, and bushings. are you looking for pins, links, and bushings for your a excavator? look no further we have parts for various models, including the pc60, pc75, pc75uu, pc100, pc 120 6, pc150, pc200, pc210, pc228uu, pc220, pc240, pc300, and the pc400. if you can t find the right piece for your machine, don t worry.
dec 30, 2015 a few points. oem pins and bearings are in the 58 to 62 rockwell hardness. that is both about the same as a roller bearing. pins are normally induction hardened 4140 or similar. bushings are case hardened en14 or similar. pin to bushing clearances are normally around 8 to 10 thou depending on manufacturer. if you run an o&k rh200 they will be
1 & 2 see details 312c, 312cl, 314c cr, 314c lcr, 312d, 312dl, 312e, 312el, 314d cr, 314d lcr pin, bucket to dipper & bucket to h link 086 0523
pins, bushing, teeth and shims. jcb 3c 2wd stud axle bushing 67 x 57 x 51mm jcb p21 ram end bushing and seal (oem 808/00098 813/00460)
bushings for an excavator thumb or a bucket are just one of those items that wears out eventually. even if you have the best thumb in the world, the thing that always gets abused is the bushings. hydraulic thumbs can put thousands of pounds of pressure on their bushings and once they are worn out, the other things on the end of your stick get
stick pin diameter (inch) stick pin diameter (mm) stick width (inch) bucket width at stick (inch) link pin diameter (inch) link pin diameter (mm) link width (inch) bucket width at link (inch) pin centers (inch) bobcat 337 1.77 45 6.00 1.77 45 3.75 8.62 bobcat 341 1.77 45 6.00 1.77 45 3.75 8.62 bobcat 435 bobcat 442 1.97 50 7.28 7.28 1.97 50 7
sep 14, 2016 this summer i put a new westendorf bucket on my 2250 ih loader. the ih pin bores were 1.125 nominal and the westendorf pin bores and pins were 1.000 nominal. i made bushings out of 1.125 x 1.015 w dom and nailed the bushings in place with good old jb weld after i cleaned and flapped out the original pin bores.
jul 21, 2015 pins and bushings for heavy equipment excavators, bulldozers, backhoes and more conequip 101 duration 5 13. conequip parts llc 24,548 views